This knife is  a one-off, a design I’ve never done before.  Not sure I’ll make another.  It’s kind of like the bullnose skinner I’ve done several of, but built off of 1×3/32 stock instead of the usual 3/16 stock for that knife.  Overall length is 7 inches with a 2 5/8 blade of CM154 steel at RC 60.  The knife has satin finished, dovetailed 416 SS bolsters and a nice thin tapered tang.  The handle is stabilized spalted mesquite from my neighbor’s front yard.  The sheath is my work as well.